Sntp Enable; Sntp Ipv6 Unicast-Server - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

•
sntp reliable authentication-keyid

sntp enable

Use sntp enable to enable the SNTP service.
Use undo sntp enable to disable the SNTP service.
Syntax
sntp enable
undo sntp enable
Default
The SNTP service is not enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the SNTP service.
<Sysname> system-view
[Sysname] sntp enable

sntp ipv6 unicast-server

Use sntp ipv6 unicast-server to specify an IPv6 NTP server for the device.
Use undo sntp ipv6 unicast-server to remove the IPv6 NTP server specified for the device.
Syntax
sntp ipv6 unicast-server { server-name | ipv6-address } [ vpn-instance vpn-instance-name ]
[ authentication-keyid keyid | source interface-type interface-number ] *
undo sntp ipv6 unicast-server { server-name | ipv6-address } [ vpn-instance vpn-instance-name ]
Default
No IPv6 NTP server is specified for the device.
Views
System view
Predefined user roles
network-admin
Parameters
server-name: Specifies the host name of the NTP server, a case-insensitive string of 1 to 253
characters.
ipv6-address: Specifies the IPv6 address of the NTP server.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the NTP server belongs,
where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the NTP server is on the
public network, do not specify this option.
46