Reaction Checked-Element { Jitter-Ds | Jitter-Sd - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Syntax
raw-request
undo raw-request
Default
No contents are specified.
Views
HTTP operation view, HTTP template view
Predefined user roles
network-admin
Usage guidelines
This command places you in raw request view and deletes the content of the previously configured
GET request.
Examples
# Enter raw request view and specify the content of a request for the HTTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] raw-request
[Sysname-nqa-admin-test-http-raw-request]
# In HTTP template view, enter raw request view and specify the content of a request for the HTTP
operation.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] raw-request
[Sysname-nqatplt-http-httptplt-raw-request]

reaction checked-element { jitter-ds | jitter-sd }

Use reaction checked-element { jitter-ds | jitter-sd } to configure a reaction entry for monitoring
one-way jitter in the NQA operation.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element { jitter-ds | jitter-sd } threshold-type { accumulate
accumulate-occurrences
[ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring one-way jitter is configured.
Views
UDP jitter operation view, voice operation view
Predefined user roles
network-admin
| average } threshold-value
216
upper-threshold lower-threshold