Download Print this page
HPE 5945 Disassembly Instructions Manual

HPE 5945 Disassembly Instructions Manual

4-slot switch

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HPE 5945 4-slot Switch JQ076A
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
MF877-00
Template Revision A
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
HPE instructions for this template are available at
MF877-01
Quantity
of items
included
in product
6
0
0
0
0
0
0
0
0
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HPE 5945

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). MF877-00 Page 2 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 3 Figure 1 Remove all the blank panel MF877-00 Page 3 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 4 Figure 2 Treatments to the power blank panel Figure 3 Treatments to the card blank panel MF877-00 Page 4 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 5 Figure 4 Unscrew all screws 3, then remove the cover assembly 4 and management panel 5 MF877-00 Page 5 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 6 Figure 5 Remove lab 4-3,4-4,4-5,4-6 and foam 4-2 from cover 4-1 Figure 6 Remove film 5-1 and film 5-3 from panel 5-2 MF877-00 Page 6 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 7 Figure 7 Unscrew all screws 6 and screws 7, then remove the pcb 8,10,11 and air guide 9 MF877-00 Page 7 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 8 Figure 8 Remove dowel 8-1, dowel bushing 8-2, spring 8-3 and radiator 8-4 from pcb 8-5 Figure 9 Unscrew all screws 10-1, then separation of pcb 10-2 and pcb 10-4, then remove the double-screw belts 10-3 MF877-00 Page 8 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 9 11-2, spring 11-3 and radiator 11-4 from pcb 11-7 Figure 11 Unscrew all double-screw belts 12 and radiator's screws, then remove radiator 13 and pcb 14 MF877-00 Page 9 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 10 Figure 12 Unscrew all screws 14-1, then remove handle 14-2 from pcb 14-3 Figure 13 Unscrew all screws 15 and screws 17, then remove film 16 and support panel 18 MF877-00 Page 10 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 11 Figure 14 Unscrew all screws 19 and double-screw belts 21, then remove rack 20 and pcb 22 Figure 15 Unscrew all screws 22-1, then remove confluence bar 22-2 from pcb 22-3 MF877-00 Page 11 Template Revision A HPE instructions for this template are available at MF877-01...
  • Page 12 Figure 16 Separation of film 23,27, shielding fingers 24, foam 25 and conductive foam 26 from base 28 MF877-00 Page 12 Template Revision A HPE instructions for this template are available at MF877-01...

This manual is also suitable for:

Jq076a