Snmp-Agent Usm-User { V1 | V2C - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
Parameters
size: Sets the maximum number of notifications that the SNMP notification queue can hold. The
value range is 1 to 1000.
Usage guidelines
When congestion occurs, the SNMP agent buffers notifications in a queue. SNMP notification queue
size sets the maximum number of notifications that this queue can hold. When the queue size is
reached, the oldest notifications are dropped for new notifications.
Examples
# Set the SNMP notification queue size to 200.
<Sysname> system-view
[Sysname] snmp-agent trap queue-size 200
Related commands
•
snmp-agent target-host
•
snmp-agent trap enable
•
snmp-agent trap life

snmp-agent usm-user { v1 | v2c }

Use snmp-agent usm-user { v1 | v2c } to add a user to an SNMPv1 or SNMPv2c group.
Use undo snmp-agent usm-user { v1 | v2c } to delete a user from an SNMPv1 or SNMPv2c group.
Syntax
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-number | acl ipv6
ipv6-acl-number ] *
undo snmp-agent usm-user { v1 | v2c } user-name
Default
No SNMP users are configured.
Views
System view
Predefined user roles
network-admin
Parameters
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
user-name: Specifies an SNMP username, a case-sensitive string of 1 to 32 characters.
group-name: Specifies an SNMPv1 or SNMPv2c group name, a case-sensitive string of 1 to 32
characters. The group can be one that has been created or not. If the group has not been created,
the user takes effect after you create the group.
147