Event Cli - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Table 75 Command output
Field
JID
PolicyName
Type
Event
TimeRegistered
TimeActive

event cli

Use event cli to configure a CLI event for a CLI-defined monitor policy.
Use undo event to delete the event in a CLI-defined monitor policy.
Syntax
event cli { async [ skip ] | sync } mode { execute | help | tab } pattern regular-exp
undo event
Default
No CLI events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
async [ skip ]: Enables or disables the system to execute the command that triggers the policy. If
you specify the skip keyword, the system executes the actions in the policy without executing the
command that triggers the policy. If you do not specify the skip keyword, the system executes both
the actions in the policy and the command entered at the CLI.
sync: Enables the system to execute the command that triggers the event only if the policy has been
executed successfully.
execute: Triggers the policy when a matching command is entered.
help: Triggers the policy when a question mark (?) is entered at a matching command line.
tab: Triggers the policy when the Tab key is pressed to complete a parameter in a matching
command line.
pattern regular-exp: Specifies a regular expression for matching commands that trigger the policy.
For more information about using regular expressions, see Fundamentals Configuration Guide.
Usage guidelines
Use CLI event monitor policies to monitor operations performed at the CLI.
Description
Job ID. This field is available for the display rtm policy active command.
Monitor policy name.
Method for creating the policy:
•
TCL—The policy is configured by using Tcl.
•
CLI—The policy is configured from the CLI.
Source of the event specified in the policy.
Options include CLI, HOTPLUG, INTERFACE, PROCESS, SNMP, SNMP_NOTIF,
and SYSLOG.
Time when the policy was created.
Time when the policy started to execute. This field is available only for the display
rtm policy active command.
312