Ptp Clock-Step - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

GM attribute values (in
hexadecimal format)
90
A0
F0 to FE
FF
Usage guidelines
This command is available only after you specify a PTP profile and a PTP mode.
Examples
# Configure the time accuracy for the Bits1 clock as 44.
<Sysname> system-view
[Sysname] ptp profile 1588v2
[Sysname] ptp mode oc
[Sysname] ptp clock-source bits1 accuracy 44
Related commands
•
ptp mode
•
ptp profile

ptp clock-step

Use ptp clock-step to configure the mode for carrying timestamps.
Use undo ptp clock-step to restore the default.
Syntax
ptp clock-step { one-step | two-step }
undo ptp clock-step
Default
Two-step mode is used.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
one-step: Specifies the single-step mode.
two-step: Specifies the two-step mode.
Usage guidelines
This command is available only after you specify a PTP profile and a PTP mode.
If you specify the PTP profile as IEEE 802.1AS, only the two-step mode is supported.
If you specify the clock node type as E2ETC, P2PTC, E2ETC+OC, or P2PTC+OC, only the two-step
mode is supported.
Description
Other.
Internal oscillator.
For use by alternate PTP profiles.
Reserved.
64