Sflow Agent - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Field
Size
VPN-instance
Description
Port information
Interface
CID
Interval(s)
FID
MaxHLen
Rate
Mode
Status

sflow agent

Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to restore the default.
Syntax
sflow agent { ip ip-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
Default
No IP address is configured for the sFlow agent. The device periodically checks whether the sFlow
agent has an IP address. If it does not, the device automatically selects an IPv4 address for the
sFlow agent. It does not save the IPv4 address in the configuration file.
Views
System view
Predefined user roles
network-admin
Parameters
ip ip-address: Specifies an IPv4 address for the sFlow agent.
ipv6 ipv6-address: Specifies an IPv6 address for the sFlow agent.
Usage guidelines
As a best practice, manually configure an IP address for the sFlow agent.
Description
Maximum length of the sFlow data portion in an sFlow packet.
Name of the VPN bound with the sFlow collector.
Description of the sFlow collector.
Information about interfaces configured with sFlow.
Interface configured with sFlow.
ID of the sFlow collector, for receiving counter sampled packets. If no sFlow
collector ID is specified, this field displays 0.
Counter sampling interval, in seconds.
ID of the sFlow collector for receiving flow sampled packets. If no sFlow
collector ID is specified, this field displays 0.
Maximum number of bytes that can be copied in a sampled packet (starting
from the packet header).
Number of packets out of which the interface samples a packet by using flow
sampling.
Flow sampling mode. The value is Random that samples a random number of
packets.
sFlow status of the port:
•
Suspended—The sFlow feature is suspended because the port is down.
•
Active—The sFlow feature is active because the port is up.
258