Type - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Any NQA template view
Predefined user roles
network-admin
Parameters
value: Specifies the maximum number of hops that the probe packets can traverse, in the range of 1
to 255.
Usage guidelines
The route-option bypass-route command sets the TTL to 1 for probe packets. The ttl command
does not take effect.
For a successful UDP tracert operation, make sure the maximum number of hops is not smaller than
the value set in the init-ttl command.
Examples
# Set the maximum number of hops to 16 for probe packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] ttl 16
# In ICMP template view, set the maximum number of hops to 16 for probe packets.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] ttl 16

type

Use type to specify the operation type of the NQA operation and enter operation type view.
Syntax
type { dhcp | dlsw | dns | ftp | http | icmp-echo | path-jitter | snmp | tcp | udp-echo | udp-jitter |
udp-tracert | voice }
Default
No operation type is specified.
Views
NQA operation view
Predefined user roles
network-admin
Parameters
dhcp: Specifies the DHCP operation type.
dlsw: Specifies the DLSw operation type.
dns: Specifies the DNS operation type.
ftp: Specifies the FTP operation type.
http: Specifies the HTTP operation type.
icmp-echo: Specifies the ICMP echo operation type.
path-jitter: Specifies the path jitter operation type.
238