Probe Packet-Timeout - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Syntax
probe packet-number packet-number
undo probe packet-number
Default
A UDP jitter or path jitter probe sends 10 packets and a voice probe sends 1000 packets.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
Parameters
packet-number: Specifies the number of packets to be sent per probe. Available value ranges
include:
•
10 to 1000 for the UDP jitter or path jitter operation.
•
10 to 60000 for the voice operation.
Examples
# Configure the UDP jitter probe to send 100 packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100

probe packet-timeout

Use probe packet-timeout to configure the timeout time for waiting for a response in the UDP jitter,
path jitter, or voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
Default
The response timeout time in the UDP jitter or path jitter operation is 3000 milliseconds.
The response timeout time in the voice operation is 5000 milliseconds.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
Parameters
packet-timeout: Specifies the timeout time in milliseconds for waiting for a response in the UDP jitter,
path jitter, or voice operation. The value is in the range of 10 to 3600000.
Examples
# Configure the timeout time for waiting for a response as 100 milliseconds in the UDP jitter
operation.
214