Security-Logfile Save; Terminal Debugging - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Examples
# Clear the log buffer.
<Sysname> reset logbuffer
Related commands
display logbuffer

security-logfile save

Use security-logfile save to manually save security logs from the security log file buffer to the
security log file.
Syntax
security-logfile save
Views
Any view
Predefined user roles
security-audit
Usage guidelines
When this command is executed, the system displays a message that logs in the buffer have been
saved to the security log file even if the security log file buffer does not contain security logs.
The system clears the security log file buffer after saving security logs to the security log file.
A local user can use this command only after being authorized as the security log administrator by
the system administrator. For more information about security log administrator, see Security
Configuration Guide.
Examples
# Manually save the security logs in the security log file buffer to the security log file.
<Sysname> security-logfile save
The contents in the security log file buffer have been saved to the file
flash:/seclog/seclog.log.
Related commands
•
info-center security-logfile directory
•
authorization-attribute (Security Command Reference)

terminal debugging

Use terminal debugging to enable the display of debug information on the current terminal.
Use undo terminal debugging to disable the display of debug information on the current terminal.
Syntax
terminal debugging
undo terminal debugging
Default
The display of debug information is disabled on the current terminal.
105