Netconf Soap Https Dscp; Netconf Soap Https Enable - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
Usage guidelines
This command is not available in FIPS mode.
This command enables the device to resolve NETCONF messages that are encapsulated with
SOAP in HTTP packets.
Examples
# Enable NETCONF over SOAP over HTTP.
<Sysname> system-view
[Sysname] netconf soap http enable

netconf soap https dscp

Use netconf soap https dscp to set the DSCP value for outgoing NETCONF over SOAP over
HTTPS packets.
Use undo netconf soap https dscp to restore the default.
Syntax
netconf soap https dscp dscp-value
undo netconf soap https dscp
Default
The DSCP value is 0 for outgoing NETCONF over SOAP over HTTPS packets.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63. A larger DSCP value represents a higher
priority.
Usage guidelines
The DSCP value of an IP packet specifies the priority level of the packet and affects the transmission
priority of the packet.
Examples
# Set the DSCP value to 30 for outgoing NETCONF over SOAP over HTTPS packets.
<Sysname> system-view
[Sysname] netconf soap https dscp 30

netconf soap https enable

Use netconf soap https enable to enable NETCONF over SOAP over HTTPS.
Use undo netconf soap https enable to disable NETCONF over SOAP over HTTPS.
344