Nqa Server Commands; Display Nqa Server - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1
# In FTP template view, apply the FTP operation to vpn1.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] vpn-instance vpn1

NQA server commands

IMPORTANT:
Configure the NQA server only for UDP jitter, TCP, UDP echo, and voice operations.

display nqa server

Use display nqa server status to display NQA server status.
Syntax
display nqa server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display NQA server status.
<Sysname> display nqa server
nqa server is: enabled
tcp-connect:
IP Address
2.2.2.2
udp-echo:
IP Address
3.3.3.3
Table 57 Command output
Field
tcp-connect
udp-echo
IP Address
Port
Vpn-instance
Port Vpn-instance
2000 -
Port Vpn-instance
3000 vpn1
Description
Information about the TCP listening service on the NQA server.
Information about the UDP listening service on the NQA server.
IP address specified for the TCP/UDP listening service on the NQA server.
Port number specified for the TCP/UDP listening service on the NQA server.
Name of the MPLS L3VPN instance to which the NQA server belongs.
242