HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference page 63

<Sysname> display ptp interface fortygige 1/0/1
Clock ID
Port number
PTP version
PTP enable
Transport of PTP
Port state
Force state
Clock step
Asymmetry correction
Delay mechanism
Announce interval (log mean)
Announce receipt time out
Sync interval (log mean)
Delay request interval (log mean)
Peer delay request interval (log mean) : 0
Mean path delay
Table 15 Command output
Field
Name
State
Delay mechanism
Clock step
Asymmetry correction
Clock ID
PTP version
PTP enable
: 000FE2-FFFE-FF0000
: 15
: 2
: Enabled
: User Datagram Protocol (IPv4)
: Slave
: No
: Two
: 0
: End to End
: 1
: 3
: 2
: 2
: 0 (ns)
Description
Name of the PTP interface.
States of the PTP interface:
•
Slave—Receives synchronization time.
•
Uncalibrated—Temporary state before the Slave state.
•
Passive—Neither receives nor sends synchronization time (a state
after the interface has received announce messages).
•
Master—Sends synchronization time.
•
Premaster—Temporary state before the Master state.
•
Listening—Neither receives nor sends synchronization time (a state
after interface initialization).
•
Faulty—PTP runs incorrectly, and the interface does not process PTP
messages.
•
Disabled—PTP does not run on the interface, and the interface does
not process PTP messages.
•
Initializing—The interface is initializing, and does not process NTP
messages.
•
N/A—No state is obtained for this field.
Delay measurement mechanism:
•
End to End—Request-response mechanism.
•
Peer to Peer—Peer delay mechanism.
Mode for carrying timestamps:
•
One—Single-step mode.
•
Two—Two-step mode.
Asymmetric delay correction value (in nanoseconds).
Clock ID of the device where the interface resides.
PTP version number. The version number is always 2.
Whether PTP is enabled or disabled:
•
Enabled.
•
Disabled.
54