Info-Center Security-Logfile Frequency; Info-Center Security-Logfile Size-Quota - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature enables the system to output security logs to the security log file buffer, and saves the
logs from the buffer to the security log file at a specific interval.
Examples
# Enable saving security logs to the security log file.
<Sysname> system-view
[Sysname] info-center security-logfile enable

info-center security-logfile frequency

Use info-center security-logfile frequency to configure the interval for saving security logs to the
security log file.
Use undo info-center security-logfile frequency to restore the default saving interval.
Syntax
info-center security-logfile frequency freq-sec
undo info-center security-logfile frequency
Default
The security log file saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
freq-sec: Specifies a saving interval in the range of 10 to 86400 seconds.
Usage guidelines
The system first outputs the security logs to the security log file buffer, and then saves the logs in the
buffer to the security log file at the specified interval.
Examples
# Save security logs to the security log file every 600 seconds.
<Sysname> system-view
[Sysname] info-center security-logfile frequency 600
Related commands
info-center security-logfile enable

info-center security-logfile size-quota

Use info-center security-logfile size-quota to set the maximum size for the security log file.
Use undo info-center security-logfile size-quota to restore the default.
97