--------------------------------------------------------------------------
Announce :476
DelayReq :0
PdelayReq:238
--------------------------------------------------------------------------
Announce :0
DelayReq :0
PdelayReq:0
Table 17 Command output
Field
Received packets
Sent packets
Discarded packets
display ptp time-property
Use display ptp time-property to display PTP clock time properties.
Syntax
display ptp time-property
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
No PTP clock time properties are displayed, if you:
•
Specify neither a PTP profile nor a PTP mode.
•
Specify the clock node type as e2etc or p2ptc.
•
Configure the ptp active force-state command.
Examples
# Display PTP clock time properties.
<Sysname> display ptp time-property
PTP clock time property:
Current UTC offset valid : True
Current UTC offset
Leap59 : Yes
Leap61 : No
Time traceable
Frequency traceable : True
Sent packets
Sync
:2543
DelayResp :0
PdelayResp:0
Discarded packets
Sync
:0
DelayResp :0
PdelayResp:0
Description
Statistics about received PTP messages.
Statistics about sent PTP messages.
Statistics about discarded PTP messages.
: 33
: True
57
Signaling
FollowUp
PdelayRespFollowUp :0
Signaling
FollowUp
PdelayRespFollowUp :0
:0
:2542
:0
:0