Info-Center Source - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

<Sysname> system-view
[Sysname] info-center security-logfile directory flash:/test

info-center source

Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
{ deny | level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost |
monitor }
Default
Table 28 lists the default log output rules.
Table 28 Default output rules
Destination
Console
Monitor
terminal
Log host
Log buffer
Log file
Security log
file
Diagnostic
log file
Views
System view
Predefined user roles
network-admin
Parameters
module-name: Specifies a module by its name. For instance, to output FTP information, set this
argument to FTP. You can use the info-center source ? command to view the modules supported
by the device.
default: Specifies all modules, which can be displayed by using the info-center source ?
command.
console: Outputs logs to the console.
Source Common
modules log
All supported
debugging
modules
All supported
debugging
modules
All supported
informational
modules
All supported
informational
modules
All supported
informational
modules
All supported
modules, cannot Disabled
be filtered
All supported
modules, cannot Disabled
be filtered
Security
Diagnostic log
log
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Debugging,
which cannot Disabled
be filtered
Debugging, which
Disabled
cannot be filtered
99
Hidden log
Disabled
Disabled
informational
informational
informational
Disabled
Disabled