Statistics Hold-Time - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Views
SNMP/voice operation view
UDP echo operation view
UDP jitter operation view
UDP tracert operation view
DNS template view
Predefined user roles
network-admin
Parameters
port-number: Specifies the source port number in the range of 1 to 65535.
Examples
# Configure port 8000 as the source port for probe packets in the UDP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] source port 8000
# In DNS template view, configure port 8000 as the source port for probe packets in the DNS
operation.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] source port 8000

statistics hold-time

Use statistics hold-time to configure the hold time of statistics groups for an NQA operation.
Use undo statistics hold-time to restore the default.
Syntax
statistics hold-time hold-time
undo statistics hold-time
Default
The hold time of statistics groups is 120 minutes.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view
ICMP/UDP echo operation view
Path/UDP jitter operation view
Predefined user roles
network-admin
Parameters
hold-time: Specifies the hold time in minutes, in the range of 1 to 1440.
Usage guidelines
A statistics group is deleted when its hold time expires.
234