Expect Ip; Expect Ipv6 - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

•
For features that use the HTTP template, the NQA client checks for the expected data if the
HTTP response contains the Content-Length header.
•
For features that use the TCP or UDP template, the NQA client checks for the expected data if
the data-fill command is configured.
Examples
# In HTTP template view, configure the expected data as welcome!.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] expect data welcome!

expect ip

Use expect ip to specify the expected IP address.
Use undo expect ip to remove all expected IP addresses.
Syntax
expect ip ip-address
undo expect ip
Default
No expected IP address is configured.
Views
DNS template view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the expected IP address for a DNS echo request.
Usage guidelines
During a DNS operation, the NQA client compares the expected IP address with the IP address
resolved by the DNS server. If they are the same, it considers the DNS server legal.
Examples
# In DNS template view, configure the expected IP address as 1.1.1.1.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] expect ip 1.1.1.1

expect ipv6

Use expect ipv6 to specify the expected IPv6 address.
Use undo expect ipv6 to remove all expected IPv6 addresses.
Syntax
expect ipv6 ipv6-address
undo expect ipv6
197