No-Fragment Enable - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Use undo next-hop to remove the next hop IP address.
Syntax
next-hop ip-address
undo next-hop
Default
No next hop IP address is configured for the ICMP echo operation.
Views
ICMP echo operation view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of the next hop.
Examples
# Specify the next hop IP address as 10.1.1.1 for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1

no-fragment enable

Use no-fragment enable to enable the no-fragmentation feature.
Use undo no-fragment enable to restore the default.
Syntax
no-fragment enable
undo no-fragment enable
Default
The no-fragmentation feature is disabled.
Views
UDP tracert operation view
Predefined user roles
network-admin
Usage guidelines
The no-fragmentation feature sets the DF field to 1. Packets with the DF field set cannot be
fragmented during the forwarding process.
You can use this command to test the path MTU of a link.
Examples
# Enable the no-fragmentation feature for the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
205