Mirroring-Group Monitor-Port (Interface View) - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

undo mirroring-group group-id monitor-egress interface-type interface-number
In interface view:
mirroring-group group-id monitor-egress
undo mirroring-group group-id monitor-egress
Default
No egress port is configured for a mirroring group.
Views
System view, interface view
Predefined user roles
network-admin
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 4. The specified mirroring
group must already exist.
interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
You can configure egress ports only for remote source groups.
For port mirroring to operate correctly, disable the following features on the egress port of a mirroring
group:
•
Spanning tree.
•
802.1X.
•
IGMP snooping.
•
Static ARP.
•
MAC address learning.
Do not configure a port of an existing mirroring group as an egress port.
Examples
# Create remote source group 1, and configure port FortyGigE 1/0/1 as its egress port in system
view.
<Sysname> system-view
[Sysname] mirroring-group 1 remote-source
[Sysname] mirroring-group 1 monitor-egress fortygige 1/0/1
# Create remote source group 2, and configure port FortyGigE 1/0/2 as its egress port in interface
view.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-source
[Sysname] interface fortygige 1/0/2
[Sysname-FortyGigE1/0/2] mirroring-group 2 monitor-egress
Related commands
mirroring-group

mirroring-group monitor-port (interface view)

Use mirroring-group monitor-port to configure the port as the monitor port for a mirroring group.
Use undo mirroring-group monitor-port to remove the monitor port from a mirroring group.
250