Reaction Checked-Element Probe-Fail (For Trigger) - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

accumulate accumulate-occurrences: Checks the total number of probe failures. The value is in the
range of 1 to 15.
consecutive consecutive-occurrences: Checks the maximum number of consecutive probe failures.
The value is in the range of 1 to 16.
action-type: Specifies what action to be triggered. The default action is none.
none: Specifies the action of displaying results on the terminal display.
trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the NMS. This keyword is not available for the DNS operation.
Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use
the undo reaction command to delete the entry, and then configure a new one.
Examples
# Create reaction entry 1 for monitoring the probe failures in ICMP echo operation. Before the NQA
operation starts, the initial state of the reaction entry is invalid. If the total number of probe failures
reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the threshold, the
state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap
message is generated and sent to the NMS.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-fail threshold-type
accumulate 10 action-type trap-only
# Create reaction entry 2 for monitoring the probe failures in ICMP echo operation. Before the NQA
operation starts, the initial state of the reaction entry is invalid. If the number of consecutive probe
failures reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the
threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry
changes, a trap message is generated and sent to the NMS.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] reaction 2 checked-element probe-fail threshold-type
consecutive 10 action-type trap-only

reaction checked-element probe-fail (for trigger)

Use reaction checked-element probe-fail to configure a reaction entry for monitoring probe
failures.
Use undo reaction to remove the specified reaction entry.
Syntax
reaction
consecutive-occurrences action-type trigger-only
undo reaction item-number
Default
No reaction entry for monitoring probe failures is configured.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view
ICMP/UDP echo operation view
item-number checked-element probe-fail
224
threshold-type consecutive