Ptp Destination-Mac; Ptp Domain - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Related commands
•
ptp profile
•
ptp mode

ptp destination-mac

Use ptp destination-mac to configure the destination MAC address for non-peer delay messages.
Use undo ptp destination-mac to restore the default.
Syntax
ptp destination-mac mac-address
undo ptp destination-mac
Default
The destination MAC address for non-peer delay messages is 011B-1900-0000.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
mac-address: Specifies the destination MAC address for non-peer delay messages, which can be
0180-C200-000E or 011B-1900-0000.
Usage guidelines
This command is available only after you specify a PTP profile and a PTP mode.
Peer delay messages include Pdelay_Req, Pdelay_Resp, and Pdelay_Resp_Follow_Up messages.
By default, the destination MAC address for peer delay messages is 0180-C200-000E, which cannot
be modified.
This command is available only if you specify the PTP profile as IEEE 1588 version 2.
This command is available only if PTP messages are transported over Ethernet.
Examples
# Configure the destination MAC address for non-peer delay messages as 0180-C200-000E on
FortyGigE 1/0/1.
<Sysname> system-view
[Sysname] ptp profile 1588v2
[Sysname] ptp mode oc
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] ptp destination-mac 0180-c200-000e
Related commands
•
ptp mode
•
ptp profile

ptp domain

Use ptp domain to configure the domain number to use for the device.
Use undo ptp domain to restore the default.
66