Info-Center Enable - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Syntax
info-center logfile overwrite-protection [ all-port-powerdown ]
undo info-center logfile overwrite-protection
Default
Log file overwrite-protection is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
all-port-powerdown: Shuts down all the physical ports except for the console port, the management
Ethernet port, and IRF ports on the device when the log file is full or the storage media runs out of
space.
Usage guidelines
This command is supported only in FIPS mode.
With log file overwrite-protection enabled, the device stops saving new logs to the log file when the
log file is full or the storage media runs out of space.
If the all-port-powerdown keyword is specified, the device shuts down all the physical ports except
for the console port, the management Ethernet port, and IRF ports on the device when the log file is
full or the storage media runs out of space. When this happens, back up the log file, delete the
original file to release the storage space, and then bring up the ports.
Examples
# Enable log file overwrite-protection.
<Sysname> system-view
[Sysname] info-center logfile overwrite-protection

info-center enable

Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the information center.
<Sysname> system-view
88