Display Poe Interface - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, the command displays
information about all PSEs in the IRF fabric. (In IRF mode.)
Usage guidelines
This command is only available for the default MDC. For more information about MDCs, see Virtual
Technologies Configuration Guide.
Examples
# (In standalone mode.) Display general PSE information.
<Sysname> display poe device
PSE ID Slot No. SSlot No. PortNum
7 2
10 3
# (In IRF mode.) Display general PSE information.
<Sysname> display poe device
Chassis 1:
PSE ID Slot No. SSlot No. PortNum
4 1
7 1
Chassis 2:
PSE ID Slot No. SSlot No. PortNum
43 2
Table 21 Command output
Field
Chassis 1
PSE ID
Slot No.
SSlot No.
PortNum
MaxPower(W)
State
Model

display poe interface

Use display poe interface to display power supplying information for PIs.
Syntax
display poe interface [ interface-type interface-number ]
MaxPower(W)
0 48
0 48
MaxPower(W)
0 48
0 48
MaxPower(W)
0 48
Description
Information for member device 1. (In IRF mode.)
ID of the PSE.
Slot number of the PSE.
Sub-slot number of the PSE.
Number of PIs on the PSE.
Maximum power of the PSE.
PSE status:
•
On—The PSE is supplying power.
•
Off—The PSE is not supplying power.
•
Faulty—The PSE has failed.
PSE model.
128
State Model
800.0 Off
800.0 Off
State Model
800.0 Off
800.0 Off
State Model
800.0 Off
LSQ1GV48SD0
LSQ1GV48SD0
LSQ1GV48SD0
LSQ1GV48SD0
LSQ1GV48SD0