Configuring Ieee 802.3X Flow Control - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 7
show interfaces interface-id
Example:
Switch# show interfaces
gigabitethernet1/0/3
Step 8
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Step 9
copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Configuring IEEE 802.3x Flow Control

SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. flowcontrol {receive} {on | off | desired}
4. end
5. show interfaces interface-id
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Purpose
Displays the interface speed and duplex mode configuration.
(Optional) Saves your entries in the configuration file.
(Optional) Saves your entries in the configuration file.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Interface Characteristics
Purpose
Enters global configuration mode
31