Configuring The Console Media Type - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
Command or Action
Step 5
no shutdown
Example:
Switch(config-if)# no shutdown
Step 6
end
Example:
Switch(config-if)# end
Step 7
show running-config
Example:
Switch# show running-config
Configuring the Console Media Type
Follow these steps to set the console media type to RJ-45. If you configure the console as RJ-45, USB console
operation is disabled, and input comes only through the RJ-45 connector.
This configuration applies to all switches in a stack.
SUMMARY STEPS
1. enable
2. configure terminal
3. line console 0
4. media-type rj45
5. end
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Interface Characteristics
Purpose
Restarts an interface.
Returns to privileged EXEC mode.
Verifies your entries.
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
35
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
