Cloning Function; Cloning From A Pc Using A Cloning Cable; Cloning Between Transceivers - Icom i2730A Instruction Manual

8
OTHER FUNCTIONS

■ Cloning function

Cloning allows you to quickly and easily transfer the entered
contents from a PC to a transceiver using the optional CS-
2730
cloning software
ceiver to another one.
D Cloning from a PC using a cloning cable
You can clone with the CS-2730
optional cloning cable.
See the CS-2730 instruction manual for details. (downloaded
from the Icom WEB site; http://www.icom.co.jp/world/)
D Cloning between transceivers
1. Connecting the master and sub transceivers
Select a master transceiver to send data to a sub transceiver.
Connect them as shown below.
Turn OFF the master and sub transceivers.
q
Connect the OPC-474
w
the master and sub transceivers.
Master transceiver (Rear)
Sub transceiver (Rear)
Turn ON the master and sub transceivers.
e
61
, or enter contents from one trans-
and the
cloning software
to the [SP2] jack of
cloning cable
OPC-474
To [SP2]
To [SP2]
2. Setting the sub transceiver
Push [MENU ]C of the sub transceiver.
r
• Enters the MENU mode.
t Rotate [DIAL]S to select "CLONE" (Clone).
(MENU-EXMENU > EXMEN-OTHERS > OTHER-CLONE)
ï]D.
Push [
y
• Goes to the next tree level.
Rotate [DIAL] S to select "CLONE" (Clone Mode).
u
ï]D.
Push [
i
• Displays "CLONE?."
o Rotate [DIAL]S to select "YES."
!0 Push [ï]D.
• Enters the Clone mode.