Cloning Function - Icom IC-E92D Instruction Manual

13
OTHER FUNCTIONS

■ Cloning function

The IC-E92D has transceiver-to-transceiver data cloning
capability. This function is useful when you want to copy all
of the programmed contents from one IC-E92D to another.
• An optional OPC-474
are required.
NECTION CABLE
q Turn the transceiver's power OFF, then connect an op-
tional OPC-474 and OPC-1797 between both [SP] jacks.
w While pushing [MR] and [MENU/
[PWR] for 1 sec. to enter cloning mode.
• "CLONE M" appears.
e Push [PTT] on the "master" transceiver.
• "CLONE OUT M" appears and the bar meter shows that cloning
is taking place.
• After the cloning is completed, the display returns to "CLONE
END."
r Push and hold [PWR] for 1 sec. to turn power OFF.
to [SP]
130
and OPC-1797
CLONING CABLE
], push and hold
to [SP]
OPC-474 (optional)
OPC-1797 (optional)
to [DATA/SP/MIC]
The optional RS-92
available to clone/edit contents with a PC (for Microsoft
® ®
Windows 98/98SE/ME/2000/XP/Windows Vista
using ICF format fi les.
-
CON
REMOTE CONTROL SOFTWARE
is also
TM ) and