Table of Contents
Advertisement
Ignore system alerts Select this option if there are system alerts for failed
Ignore
Compatibility
Override failed
software update
5
Click OK.
6
Click Yes.
When prompted to confirm the software override options, continue to click
Yes until the upgrade starts.
7
After the upgrade completes, check that the software versions are correct
and that the system status is Normal.
Update the Drive Firmware
During the initial installation of an Oracle FS System, make sure the drive
firmware for all of the drives is current. Installing the updates of the drive
firmware is a separate process from the software updates.
Note: Updating the drive firmware is a disruptive process and requires restarting
the system.
Note: Use the primary administrator account to perform the update operation.
The default password is
1
Navigate to Support > Software and Firmware.
The summary page displays the software and firmware packages currently
installed on the Drive Enclosures, Drives, Pilots, and Controllers, as well as
any staged software and firmware packages.
2
Compare the version numbers of the drive firmware displayed in Installed
Software and Firmware with the version numbers of the drive firmware
displayed in Staged Software and Firmware.
If the version numbers of the drive firmware displayed in Staged Software
and Firmware are higher than the version numbers of the drive firmware
displayed in Installed Software and Firmware, proceed with the following
steps.
3
Select Actions > Update Drive Firmware.
4
Select the Install? checkboxes for each of the drive types with a current
version of firmware that is lower than the pending version of firmware.
5
Click OK.
The system restarts. The drive firmware is installed as the system restarts.
Configure and Connect to the Customer Management Network
unable to resolve the condition, contact Oracle
Customer Support.
email, failed call-home, or a failure to connect to an
NTP server.
Select these two options if the software update fails
but the system returns to a Normal status with only
a compatibility error. If a second attempt to
upgrade the software fails, contact Oracle Customer
Support.
.
pillar
75
Advertisement
Table of Contents
