Advertisement
The 1.6TB solid state drive (SSD) is used in multiple
brackets) depending on the system. Replacement SSDs are shipped with two different types of
these differences.
The SSD included in this kit is assembled with the drive carrier that is compatible with the Oracle ZFS Storage ZS3
The SSD included in this kit is assembled with the drive carrier that is
When replacing an SSD in an Oracle FS System Drive Enclosure
replacement SSD with the drive carrier that is compatible with the DE2
Kit Contents
• One 1.6TB SSD pre-installed in a drive carrier
• One empty drive carrier required to install the 1.6TB SSD
• Five Phillips Number 1 screws (four required
• One overlay label that contains the new assembly part number
verlay label that contains the new assembly part number
Required Tools
• Phillips Number 1 screwdriver
Replace the Drive Carrier
NOTE: Before removing a failed SSD drive from a Drive Enclosure, be sure to install the new SSD into the drive carrier that is
compatible with the DE2-24P Drive Enclosure.
1. To remove the SSD from the pre-installed
Copyright © 2014, Oracle and/or its affiliates. All rights reserved.
Copyright © 2014, Oracle et/ou ses affiliés. Tous droits réservés.
Common 1.6TB
multiple Oracle storage systems that require different drive carriers (also known as
. Replacement SSDs are shipped with two different types of drive carriers to accommodate
System Drive Enclosure, you must exchange the drive carrier pre
compatible with the DE2-24P Drive Enclosure. Please read the instructions below.
carrier that is compatible with the Oracle ZFS Storage ZS3
that is compatible with the Oracle ZFS Storage ZS3-2 server
to install the 1.6TB SSD in the DE2-24P Drive Enclosure
screws (four required screws and one screw provided as a spare)
drive from a Drive Enclosure, be sure to install the new SSD into the drive carrier that is
drive from a Drive Enclosure, be sure to install the new SSD into the drive carrier that is
24P Drive Enclosure.
installed drive carrier, unscrew the four screws as shown in the following graphic
1.6TB
SSD Kit
7087210
different drive carriers (also known as
Oracle ZFS Storage ZS3-2 server.
Please read the instructions below.
carriers to accommodate
pre-installed on the
in the following graphic:
Part No. 7087210
March 2014
Advertisement
Table of Contents
Related Manuals for Oracle 7087210
Summary of Contents for Oracle 7087210
- Page 1 The SSD included in this kit is assembled with the drive carrier that is The SSD included in this kit is assembled with the drive carrier that is compatible with the Oracle ZFS Storage ZS3 Oracle ZFS Storage ZS3-2 server.
- Page 2 The SSD is now ready to be installed into a DE2-24P Drive Enclosure. 4. Install the failed drive into the original (shorter) drive carrier provided in the kit and return all of the parts to Oracle. Copyright © 2014, Oracle and/or its affiliates. All rights reserved.
Need help?
Do you have a question about the 7087210 and is the answer not in the manual?
Questions and answers