Installation Overview - Oracle ZS4-4 Installation Manual

Installation Overview

This guide describes installation procedures for the Oracle ZFS Storage Appliance.
Follow these steps to install your appliance:
1. Read "Prerequisites for Installation" on page
2. Review the information about your disk shelves and controllers in
Prerequisites and Hardware Overviews" on page
3. Install your disk shelves using the appropriate procedure in
Shelves" on page 57.
4. Install your controllers:
"Installing a ZS4-4 or ZS3-4 Controller" on page 73
■
"Installing a ZS3-2 Controller" on page 81
■
"Installing a 7x20 Controller" on page 99
■
5. Cable the appliance as described in
ZFS Storage Appliance Cabling
For the maximum number of disk shelves supported per controller configuration, see
"Maximum Disk Shelves per Controller" on page
6. Power on your appliance using the procedures in
Appliance" on page
7. Complete first-time configuration and prepare the appliance for production using the
procedures in "Configuring the Appliance for the First Time" on page
For information about troubleshooting hardware faults using Oracle Integrated Lights Out
Manager (ILOM), see "Troubleshooting Hardware Faults" on page
"Cabling the Appliance" on page 115
Guide.
119.
11.
"Installation
11.
"Installing Disk
16.
"Powering On the
139.
Installation Overview
and the Oracle
123.
9