Displaying Characteristics Of Command Line - H3C S9500 Series Operation Manual

Operation Manual – Command Line Interface
H3C S9500 Series Routing Switches
chinese
english
3) Input a command with a "?" separated by a space. If this position is for parameters,
all the parameters and their brief descriptions will be listed.
[H3C] garp timer leaveall ?
INTEGER<65-32765>
[H3C] garp timer leaveall 300 ?
<cr>
<cr> indicates no parameter in this position. The next command line repeats the
command, you can press <Enter> to execute it directly.
4) Input a character string followed by a "?", then all the commands beginning with
this character string will be listed.
<H3C> p?
ping pwd
5) Enter a command followed by a character string and a "?". All the keywords
starting with this string are listed.
<H3C> display ver?
version
6) Press <Tab> after entering the first several letters of a keyword to display the
complete keyword, provided these letters can uniquely identify the keyword in this
command.

1.3.2 Displaying Characteristics of Command Line

For the information to be displayed exceeding one screen, pausing function is provided.
In this case, users can have three choices, as shown in the table below.
Table 1-2 Functions of displaying
Press <Ctrl+C> when the display pauses
Enter a space when the display pauses
Press <Enter> when the display pauses
Chinese environment
English environment
Value of timer in centiseconds
(LeaveAllTime > (LeaveTime [On all ports]))
Time must be multiple of 5 centiseconds
Key or Command
Chapter 1 Command Line Interface
Stop displaying and executing
command.
Continue to display the next screen of
information.
Continue to display the next line of
information.
1-11
Function