H3C S9500 Series Operation Manual page 1082

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Operation Manual – QoS

H3C S9500 Series Routing Switches

III. Configuration procedure

# Configure VLAN 10 and create VLAN interface 10. Configure a proper IP address for

the VLAN interface.

<H3C> system-view

[H3C] vlan 10

[H3C-vlan10] port Ethernet 3/1/1

[H3C-vlan10] port GigabitEthernet 7/1/1

[H3C-vlan10] quit

[H3C] interface Vlan-interface 10

[H3C-Vlan-interface10] ip address 10.10.10.1 255.255.255.0

[H3C-Vlan-interface10] quit

# Create ACL 3000 to permit ICMP packets to pass through.

[H3C] acl number 3000

[H3C-acl-adv-3000] rule 0 permit icmp

[H3C-acl-adv-3000] quit

# Configure traffic policing on VLAN 10 with the following parameters: CIR 2000, CBS

200000, EBS 300000, and dropping the exceeding packets.

[H3C] vlan 10

[H3C-vlan10] traffic-limit inbound ip-group 3000 2000 200000 300000 conform

remark-drop-priority exceed drop

Chapter 5 VLAN-ACL Configuration

Chapters

Table of Contents