H3C S9500 Series Operation Manual page 881

Operation Manual – MPLS VPLS
H3C S9500 Series Routing Switches
[NPE2-Ethernet2/1/26] quit
[NPE2] vlan 12
[NPE2-vlan12] interface vlan-interface 12
[NPE2-Vlan-interface12] ip address 12.12.12.2 24
[NPE2-Vlan-interface12] quit
[NPE2] interface GigabitEthernet 4/1/2
[NPE2-GigabitEthernet4/1/2] port link-type trunk
[NPE2-GigabitEthernet4/1/2] port trunk permit vlan 12
[NPE2-GigabitEthernet4/1/2] quit
[NPE2] vlan 23
[NPE2-vlan23] quit
[NPE2] interface Ethernet 2/1/15
[NPE2-Ethernet2/1/15] port link-type trunk
[NPE2-Ethernet2/1/15] port trunk permit vlan 23
[NPE2-Ethernet2/1/15] interface vlan-interface 23
[NPE2-Vlan-interface23] ip address 23.23.23.2 24
[NPE2-Vlan-interface23] quit
[NPE2] ospf
[NPE2-ospf-1] area 0
[NPE2-ospf-1-area-0.0.0.0] network 12.12.12.0 0.0.0.255
[NPE2-ospf-1-area-0.0.0.0] network 26.26.26.0 0.0.0.255
[NPE2-ospf-1-area-0.0.0.0] network 23.23.23.0 0.0.0.255
[NPE2-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
# Configure redirection for the public network ports.
[NPE2] flow-template user-defined slot 2 ethernet-protocol vlanid
[NPE2] flow-template user-defined slot 4 ethernet-protocol vlanid
[NPE2] acl number 4000
[NPE2-acl-link-4000] rule 1 permit mpls l2label-range ingress any egress any
[NPE2-acl-link-4000] quit
[NPE2] interface GigabitEthernet 4/1/2
[NPE2-GigabitEthernet4/1/2] flow-template user-defined
[NPE2-GigabitEthernet4/1/2] traffic-redirect inbound link-group 4000 rule 1
slot 5 12
[NPE2-GigabitEthernet4/1/2] quit
[NPE2] interface
[NPE2-Ethernet2/1/26] flow-template user-defined
[NPE2-Ethernet2/1/26] traffic-redirect inbound link-group 4000 rule 1 slot 5
26
[NPE2-Ethernet2/1/26] quit
[NPE2] interface
[NPE2-Ethernet2/1/15] flow-template user-defined
Ethernet 2/1/26
Ethernet 2/1/15
1-30
Chapter 1 VPLS Configuration