Qos Overview - H3C S9500 Series Operation Manual

Operation Manual – QoS
H3C S9500 Series Routing Switches
Chapter 1 QoS Configuration
When configuring QoS, go to these sections for information you are interested in:

QoS Overview

QoS Configuration Task List
Displaying and Debugging QoS Configuration
QoS Configuration Examples
1.1 QoS Overview
1.1.1 Introduction
Conventional packet network treats all packets equally. Each switch/router processes
all packets in First-in-First-out (FIFO) mode and then transfers them to the destination
in the best effort, but it provides no commitment and guarantee to such transmission
performance as delay and jitter.
With fast growth of computer networks, more and more data like voice and video that
are sensitive to bandwidth, delay and jitter are transmitted over the network. This
makes growing demands on quality of service (QoS) of networks.
Ethernet technology is a widely-used network technology dominant for independent
LANs and many LANs based on Ethernet are organic parts of the Internet. In addition,
Ethernet access is becoming one of the major access modes for Internet users.
Therefore it is inevitable to consider Ethernet QoS if we want to achieve point-to-point
global QoS solution. Ethernet switching devices then naturally need to provide different
QoS guarantee for different types of services, especially for those which are sensitive
to delay and jitter.
1.1.2 Terminology
I. Flow
Flow refers to a group of packets passing thought a switch.
II. Traffic classification
Traffic classification is the technology that identifies the packets with a specified
attribute according to a specific rule. Classification rule refers to a packet filtering rule
configured by an administrator. A classification rule can be very simple. For example,
the switch can identify the packets of different priority levels according to the ToS (type
of service) field in the packet headers. It can also be very complex. For example, it may
contain information of the link layer (Layer 2), network layer (Layer 3) and transport
layer (Layer 4) and the switch classifies packets according to such information as MAC
1-1
Chapter 1 QoS Configuration