Setting The Summer Time; Displaying The Status And Information Of The System - H3C S9500 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S9500 Series Routing Switches
Set the local time
Restore to the default
UTC time zone
By default, the UTC time zone is adopted.

1.1.4 Setting the Summer Time

You can set the name, start and end time of the summer time.
Perform the following configuration to set/remove the summer time:
Set the name and range
of the summer time
Remove the setting of the
summer time
By default, the summer time is not set.

1.2 Displaying the Status and Information of the System

Display the system clock
Display the system
version
Display the status of the
debugging
Display the information
about the optical module
connected with an
in-position optical port on
current frame
Display the manufacturing
information of a card
To do...
clock timezone
zone-name { add |
minus } HH:MM:SS
undo clock timezone
To do...
clock summer-time zone-name
{ one-off | repeating } start-time
start-date end-time end-date
offset-time
undo clock summer-time
To do...
display clock
display version
display debugging
[ interface { interface- type
interface-number ]
[ module-name ]
display fiber-module
or
display fiber-module
[ interface-type
interface-number ]
display device manuinfo
[ slot slot-number ]
Chapter 1 System Maintenance and
Use the command...
Use the command...
Use the command...
1-2
Debugging
Remarks
Available in user view
Available in user view
Remarks
Available in user
view
Available in user
view
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view