H3C S9500 Series Operation Manual page 1391

Operation Manual – Device Management
H3C S9500 Series Routing Switches
2) Run the FTP client program on the PC to set up an FTP connection with the switch.
Then upload the switch program switch.app to the flash root directory on the
switch and download the configuration file switch20080101.cfg from the switch.
The FTP client program is not provided along with the switch, so, it is for you to
purchase and install it.
Caution:
If the Flash Memory on the switch is not sufficient, delete the original application
program in the flash before uploading the new one into the flash of the switch.
3) After uploading, performs upgrading on the switch.
<H3C>
# You can use the boot boot-loader command to specify the new file as the application
program on the next booting and reboot the switch to implement the upgrading of the
application program.
<H3C> boot boot-loader primary flash:/switch.app slot 0
<H3C> reboot
1-9
Chapter 1 Device Management