H3C S9500 Series Operation Manual page 1057

Operation Manual – QoS
H3C S9500 Series Routing Switches
II. Network diagram
GE7/1/1
VLAN2
PC A
1.0.0.1/8
Figure 1-8 Network diagram for traffic redirecting configuration
III. Configuration procedure
1) Define the time range.
# Define the time range from 8:00 to 18:00.
<H3C> system-view
[H3C] time-range test 8:00 to 18:00 daily
2) Create an ACL for traffic sourced from PC A.
# Create ACL 2000 and enter the corresponding view.
[H3C] acl number 2000
# Define an ACL rule for the traffic sourced from PC A.
[H3C-acl-basic-2000] rule 0 permit source 1.0.0.1 0 time-range test
[H3C-acl-basic-2000] quit
3) Modify the next hop for the packets sourced from PC A.
# Configure the next hop for the packets sourced from PC A as 2.0.0.1.
[H3C] interface GigabitEthernet7/1/1
[H3C-GigabitEthernet7/1/1] traffic-redirect inbound ip-group 2000 rule 0
next-hop 2.0.0.1
1.4.6 Traffic Redirecting Configuration Example (II)
I. Network requirements
All devices of a company are connected to GigabitEthernet 2/1/2 of the S9500
switch.
The switch connects to the ISP router through two links. One is a gigabit link
connecting to GigabitEthernet 2/1 of the switch, and the other is a 100 Mbps link
connected to Ethernet 3/1/1 of the switch.
GE7/1/8
GE7/1/2
VLAN3
PC B
2.0.0.1/8
1-30
Chapter 1 QoS Configuration