H3C S9500 Series Operation Manual page 1203

Operation Manual – SSH
H3C S9500 Series Routing Switches
Table 1-1 SSH2.0 configuration tasks
Enter system view
Enter user interface view
of VTY type
Set the protocol
supported by current user
interface
Return to system view
Generate a local RSA key
pair
Destroy a local RSA key
pair
Configure the SSH user
authentication mode
Configure default
authentication type for
SSH users
Configure the updating
cycle of the server key
Configure the SSH
authentication timeout
Configure the number of
SSH authentication retries
Enter public key view
Enter public key edit view
to edit the key
Exit public key edit view
Exit public key edit view
Assign the public key for
an SSH user
To do...
system-view
user-interface vty
interface-number
protocol inbound { all |
ssh | telnet }
quit
rsa local-key-pair create
rsa local-key-pair
destroy
ssh user username
[ authentication-type
{ password | rsa |
password-publickey |
all } ]
ssh authentication-type
default [ password | rsa |
all |
password-publickey ]
ssh server
rekey-interval hours
ssh server timeout
seconds
ssh server
authentication-retries
times
rsa peer-public-key
key-name
public-key-code begin
public-key-code end
peer-public-key end
ssh user username
assign rsa-key keyname
Chapter 1 SSH Terminal Service Configuration
Use the command...
1-4
Remarks
—
—
Optional
—
Required
Optional
Required
By default, users are
unable to log in.
Required;
By default, users are
unable to log in to the
system.
Optional
By default, the system
does not update the
server key.
Optional
By default, it is 60
seconds.
Optional
By default, it is three
times.
Required
Required
Required
Required
Required