Ftp Configuration; Configuring The Ftp Server Authentication And Authorization - H3C S9500 Series Operation Manual

Operation Manual – FTP and TFTP
H3C S9500 Series Routing Switches

1.2 FTP Configuration

This section covers the following topics:
Enabling/Disabling FTP Server

Configuring the FTP Server Authentication and Authorization

Configuring the Running Parameters of FTP Server
Displaying and Maintaining FTP Server
Disconnecting an FTP User
1.2.1 Enabling/Disabling FTP Server
Perform the following configuration to enable/disable FTP Server:
Enable the FTP server
Disable the FTP server
FTP server supports multiple users to access at the same time. A remote FTP client
sends request to the FTP server. Then, the FTP server will carry out the corresponding
operation and return the result to the client.
By default, FTP server is disabled.
1.2.2 Configuring the FTP Server Authentication and Authorization
The authorization information of FTP server includes the path to the desired directory
for FTP users. The FTP server service is available only for the authenticated and
authorized users. The authorization information of FTP server includes the top working
directory provided for FTP clients.
Perform the following configuration to configure the FTP Server Authentication and
Authorization:
Create new local FTP
user and enter local user
view
Delete local FTP user
Configure password for
local user
To do...
ftp server enable
undo ftp server
To do...
local-user { username |
password-display-mode { auto |
cipher-force } }
undo local-user { username | all
[ service-type { ftp | lan-access |
telnet | ppp | ssh | terminal } ] |
password-display-mode }
password [ cipher | simple ]
password
Chapter 1 FTP and TFTP Configuration
Use the command...
Use the command...
1-3
Remarks
Available in system view
Available in system view
Remarks
Available in
system view
Available in
system view
Available local
user view