Displaying And Debugging Snmp - H3C S9500 Series Operation Manual

Operation Manual – SNMP
H3C S9500 Series Routing Switches
After this command is configured, an extended linkUp/linkDown trap is the standard
linkUp/linkDown trap defined in RFC appended with the interface description and
interface type information.
Caution:
Not all NMSs can process the extended trap messages correctly. By default, the device
sends traps whose format is consistent with that defined in the standard IF-MIB. This
command is available only when the NMS used supports the extended trap.

1.3 Displaying and Debugging SNMP

Display the statistics
information about SNMP
packets
Display the engine ID of
the active device
Display the group name,
the security mode, the
states for all types of
views, and the storage
mode of each group of the
switch.
Display SNMP user
information in the group
user table
Display the current
community name
Display the current MIB
view
Display the contact
character strings, location
character strings, and the
SNMP version of the
system
To do...
display snmp-agent
statistics
display snmp-agent
local-engineid
display snmp-agent
group [ group-name ]
display snmp-agent
usm-user [ engineid
engineid | group
groupname | username
username ]*
display snmp-agent
community [ read |
write ]
display snmp-agent
mib-view [ exclude |
include | { viewname
mib-view } ]
display snmp-agent
sys-info [ contact |
location | version ]*
Use the command...
1-9
Chapter 1 SNMP Configuration
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view