Introduction To Ftp Client - H3C S9500 Series Operation Manual

Operation Manual – FTP and TFTP
H3C S9500 Series Routing Switches
Table 1-1 Configuration of the switch as FTP client
Device
Switch
PC
Table 1-2 Configuration of the switch as FTP server
Device
Switch
PC
Caution:
The prerequisite for normal FTP function is that the switch and PC are reachable.

1.1.2 Introduction to FTP Client

As an additional function provided by the switch, FTP client is an application module
and no configuration is needed on FTP clients. The switch connects the FTP clients and
the remote server and inputs the command from the clients for corresponding
operations (such as creating or deleting a directory).
Configuration
Log into the remote FTP
server directly with the ftp
command.
Start FTP server and make
such settings as
username, password, and
authority.
Configuration
Start FTP server.
Configure authentication
and authorization for FTP
server.
Configure running
parameters for FTP server.
Log into the switch from
FTP client.
1-2
Chapter 1 FTP and TFTP Configuration
Default
You need first get FTP
user command and
password, and then log
— into the remote FTP
server. Then you can get
the directory and file
authority.
— —
Default
You can view the
configuration information
FTP server
of FTP server with the
is disabled
display ftp-server
command
Configure username,
— password and authorized
directory for FTP users
Configure timeout time
—
value for FTP server.
— —
Remarks
Remarks