H3C S9500 Series Operation Manual page 1287

Operation Manual – Login and User Interface
H3C S9500 Series Routing Switches
Figure 1-9 Set the dialed number
Figure 1-10 Dial on the remote PC
Step 4: Enter the preset login password on the remote terminal emulator and wait for
the prompt such as <H3C>. Then you can configure and manage the switch. Enter "?"
to get the immediate help. For details of specific commands, refer to the following
chapters.
Note:
By default, when a Modem user logs in, he can access the commands at Level 0.
1-7
Chapter 1 Switch Login