H3C S9500 Series Operation Manual page 1420

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Operation Manual – Cluster Management

H3C S9500 Series Routing Switches

II. Network diagram

Figure 2-1 Network diagram for NDP configuration

III. Configuration procedure

Configure Switch A.

# Enable NDP in the system and on Ethernet 1/1/1 and Ethernet 1/1/2.

<H3C> system-view

System View: return to User View with Ctrl+Z.

[H3C] ndp enable

[H3C] interface ethernet 1/1/1

[H3C-Ethernet1/1/1] ndp enable

[H3C-Ethernet1/1/1] quit

[H3C] interface ethernet 1/1/2

[H3C-Ethernet1/1/2] ndp enable

# Configure the aging timer for NDP information as 200 seconds.

[H3C-Ethernet1/1/2] quit

[H3C] ndp timer aging 200

# Configure NDP packets to be sent every 70 seconds.

[H3C] ndp timer hello 70

Configure Switch B (Configure Switch C in a similar way).

# Enable NDP on the device and Ethernet 1/1/1.