H3C S9500 Series Operation Manual page 924

Operation Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
III. Displaying VPN-instance related information
After the above configuration, executing the display command in any view can display
the VPN-instance related information, including its RD, description, the interfaces
associated with it, and so on. You can view the information to verify the configuration
effect.
Table 1-5 Display VPN-instance related information
Display the VPN-instance related
information, including its RD, description, the
interfaces associated with it, and so on
IV. Debugging information concerning processing BGP
Execute debugging command in user view for the debugging of the related
vpn-instance information.
Table 1-6 Enable the debugging for processing BGP
Enable the debugging for
processing BGP
Disable the debugging
V. Displaying MPLS L3VPN-LSP information
Table 1-7 Display MPLS L3VPN-LSP information
Display MPLS L3VPN LSP information
Display MPLS L3VPN LSP
VPN-instance information
To do...
To do...
debugging bgp { all | event | normal | { keepalive |
mp-update | open | packet | update | route-refresh
| update } [ receive | send |] [ verbose ] }
undo debugging bgp { {all | event | normal |
keepalive | mp-update | open | packet | update |
route-refresh } [ receive | send | verbose ] } { all |
event | normal | update }
To do...
Chapter 1 MPLS L3VPN Configuration
display ip vpn-instance
[ vpn-instance-name | verbose ]
Use the command...
Use the command...
display mpls l3vpn-lsp [ verbose]
include text
display mpls l3vpn-lsp [ vpn-instance
vpn-instance-name ] [ transit | egress |
ingress ] [include text | verbose ]
1-27
Use the command...