H3C S9500 Series Operation Manual page 884

Operation Manual – MPLS VPLS
H3C S9500 Series Routing Switches
[NPE3-ospf-1-area-0.0.0.0] network 6.6.6.6 0.0.0.0
[NPE3-ospf-1-area-0.0.0.0] network 26.26.26.0 0.0.0.255
[NPE3-ospf-1-area-0.0.0.0] network 16.16.16.0 0.0.0.255
# Configure redirection for the public network interface.
[NPE3] flow-template user-defined slot 2 ethernet-protocol vlanid
[NPE3] acl number 4000
[NPE3-acl-link-4000] rule 0 permit mpls l2label-range ingress any egress any
[NPE3-acl-link-4000] quit
[NPE3] interface Ethernet 2/1/26
[NPE3-Ethernet2/1/26] flow-template user-defined
[NPE3-Ethernet2/1/26] traffic-redirect inbound link-group 4000 rule 0 slot 10
26
[NPE3-Ethernet2/1/26] interface Ethernet 2/1/31
[NPE3-Ethernet2/1/31] flow-template user-defined
[NPE3-Ethernet2/1/31] traffic-redirect inbound link-group 4000 rule 0 slot 10
16
[NPE3-Ethernet2/1/31]
# Enable MPLS on public network interfaces.
[NPE3] interface vlan-interface 26
[NPE3-Vlan-interface26] mpls
[NPE3-Vlan-interface26] mpls ldp enable
[NPE3-Vlan-interface26] interface vlan-interface 16
[NPE3-Vlan-interface16] mpls
[NPE3-Vlan-interface16] mpls ldp enable
# Configure the MPLS LDP remote session.
[NPE3] mpls ldp remote-peer 2
[NPE3-mpls-remote2] remote-ip 2.2.2.2
[NPE3-mpls-remote2] quit
[NPE3] mpls ldp remote-peer 1
[NPE3-mpls-remote1] remote-ip 1.1.1.1
# Perform VPN-related configuration for the private network side.
[NPE3] mpls l2vpn
[NPE3] vsi Hvpls static
[NPE3-vsi-Hvpls] pwsignal ldp
[NPE3-vsi-Hvpls-ldp] vsi-id 1
[NPE3-vsi-Hvpls-ldp] peer 1.1.1.1
[NPE3-vsi-Hvpls-ldp] peer 2.2.2.2
[NPE3-vsi-Hvpls-ldp] quit
[NPE3-vsi-Hvpls] broadcast-restrain 100
[NPE3-vsi-Hvpls] bandwidth 1024000
1-33
Chapter 1 VPLS Configuration