Ssh Client Configuration - H3C S9500 Series Operation Manual

Operation Manual – SSH
H3C S9500 Series Routing Switches
Specify the public key for an SSH user
Cancel the corresponding relationship
between the user and the public key
XII. Configuring the server compatibility mode
Use this configuration task to set whether the server should be compatible with the SSH
1.x client.
Perform the following operations in system view to configure the compatibility mode:
Set the server to be compatible with the
SSH 1.x client
Set the server to be incompatible with
the SSH 1.x client
By default, the server is compatible with the SSH 1.x client.

1.3 SSH Client Configuration

The following sections describe the SSH client configuration tasks.
Starting the SSH client
Specifying the public key of the server
Configuring the first-time authentication of the server
I. Starting the SSH client
Use this configuration task to enable the SSH client, establish the connection with the
server, and carry out interactive session.
Perform the following operations in system view to start the SSH client:
To do...
Start the SSH client
To do...
To do...
ssh2 { host-ip | host-name } [ port-num ] [ prefer_kex
{ dh_group1 | dh_exchange_group } ]
[ prefer_ctos_cipher { des | 3des | aes128 } ]
[ prefer_stoc_cipher { des | 3des | aes128 } ]
[ prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
[ prefer_stoc_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
1-10
Chapter 1 SSH Terminal Service Configuration
Use the command...
ssh user username assign rsa-key
keyname
undo ssh user username assign
rsa-key
Use the command...
ssh server compatible_ssh1x enable
undo ssh server compatible_ssh1x
Use the command...