H3C S9500 Series Operation Manual page 1407

Routing switches
Hide thumbs Also See for S9500 Series:
Table of Contents

Advertisement

Operation Manual – Cluster Management
H3C S9500 Series Routing Switches
Delete a upgrade program
from the management device
For more information about the delete command, refer to File System Management
Commands.
1.2.3 Saving Configuration Information about Connected Switches
Perform the following configuration to save configuration information about the
managed switches into the management device:
Save the configuration information
of a specified switch to the memory
of the management device.
Save the configuration information
of a specified switch to the flash
memory.
Configuration information about a specified switch that is saved to the memory of the
management device using the save lswconfig command gets lost after you reboot the
management device.
The backup lswconfig command saves the configuration information collected by the
save lswconfig command to the flash memory. As data saved in the flash memory
does not get lost even if the management device is rebooted. Therefore, with its
configuration information saved in the flash memory, you can quickly restore the
operating state of a switch using its configuration information in the case of switch
resetting.
# Save the configuration information about the Ethernet switch directly connected to
the 1/1/20-/ port to the memory.
[H3C-hgmp] save lswconfig 1/1/20-/
Waiting........
# Write the configuration information saved in the memory to the flash memory.
[H3C-hgmp] backup lsw
Writing lanswitch configuration to flash......
1.2.4 Setting the State and Alias of a Switch
Contrary to the fact that HGMP identifies switches using their position parameters, it is
impossible for users to locate a managed switch by its position parameter. An intuitive
alternative is, to set aliases for switches using the set lswname command.
To do...
To do...
Chapter 1 HGMP V1 Configuration
Use the command...
delete [ /unreserved ]
file-url
Use the command...
save lswconfig
lanswitch-loc
backup lswconfig
1-6
Remarks
Available in user view
Remarks
Available in HGMP
view
Available in HGMP
view

Advertisement

Table of Contents
loading

Table of Contents