H3C S9500 Series Operation Manual page 1228

Operation Manual – IDS Linkage
H3C S9500 Series Routing Switches
[H3C] interface Ethernet 3/1/1
[H3C-Ethernet3/1/1] ids-acl enable
[H3C-Ethernet3/1/1] display ids all
1.4 Displaying IDS linkage Configuration
Enable IDS linkage
debugging
Display IDS linkage
configuration information
To do...
debugging ids-acl
display ids { all |
controlled-interface |
name name | source
ip-addr | destination
ip-addr }
Chapter 1 IDS Linkage Configuration
Use the command...
1-5
Remarks
By default, IDS linkage
debugging is disabled.
You can execute the
display ids command in
any view.