H3C S9500 Series Operation Manual page 1078

Operation Manual – QoS
H3C S9500 Series Routing Switches
Enter VLAN view
Configure packet filtering
(activating ACLs)
Configure traffic policing
Tag priority for packets
Configure packet
redirection
Configure traffic mirroring
To do...
vlan vlan-id
packet-filter inbound
ip-group { acl-number |
acl-name } [ rule rule
[ system-index index ] ]
traffic-limit inbound
ip-group { acl-number |
acl-name } [ rule rule
[ system-index index ] ]
[ tc-index index ] cir cbs
ebs [ pir ] [ conform
{ { remark-cos |
remark-drop-priority } *|
remark-policed-service
} ] [ exceed { forward |
drop } ]
traffic-priority inbound
ip-group { acl-number |
acl-name } [ rule rule
[ system-index index ] ]
{ auto |
remark-policed-service
{ trust-dscp | dscp
dscp-value | untrusted
dscp dscp-value cos
cos-value
local-precedence
local-precedence
drop-priority
drop-level } }
traffic-redirect inbound
ip-group { acl-number |
acl-name } [ rule rule
[ system-index index ] ]
{ cpu | next-hop ip-addr1
[ ip-addr2 ] [ invalid
{ forward | drop } ] }
mirrored-to inbound
ip-group { acl-number |
acl-name } [ rule rule
[ system-index index ] ]
cpu
Chapter 5 VLAN-ACL Configuration
Use the command...
5-2
Remarks
VLAN-ACL is prohibited
from being applied to the
VLAN containing POS or
MPLS intermixing ports.
Optional
Optional
Optional
Optional
When executed in VLAN
view, the traffic-redirect
command only redirects
packets to the next hop
and CPU instead of ports
or service processor
boards. In this case, the
nested-vlan or
modified-vlan keywords
are not supported.
Optional